Conformity Sheet
Every category · Industrial equipment

Forklift or lifting equipment

Lifting machinery has additional essential requirements on stability and overload, some categories are on the high-risk list, and in the US the OSHA powered industrial truck rules and the ANSI/ITSDF standard apply.

Regimes

Regimes engaged, per market

Standing when pasted with its name: mapped

EUMachinery RegEMCRoHSREACHWEEE
UKUK MachineryUKCAUK EMCUK RoHSUK REACHUK WEEE
USOSHA/ANSIUL/NRTLFCC Part 15
Documents

What the file has to hold

After sale

Duties that continue after sale

This week

This week

Check whether the model sits in an EU high-risk category needing a notified body, and confirm the rated capacity plate matches the test.

Licensed text

What holding one is evidence for

Requirement text and evidence artefacts from a human-verified corpus. Data licensed to Conformity Sheet by The Art of Service Pty Ltd, revocable, non-transferable.

Machinery Reg: EU Machinery Regulation (Regulation (EU) 2023/1230)
Machinery Reg Art.10 Obligations of manufacturers of machinery and related products (Article 10)

Article 10 imposes the central manufacturer obligations: (a) ensure the EHSR Annex III compliance + carry out risk assessment per Annex III 1; (b) draw up the technical documentation per Annex IV + retain for 10 years; (c) carry out the applicable conformity assessment procedure (Article 25); (d) draw up the EU declara...

Evidence an inspector accepts: Annex IV technical documentation per machine retained 10 years; Risk assessment + design + commissioning file aligned with Annex III; Article 21 EU DoC + Article 23-24 CE marking artwork
Common gap: Machine placed without Annex IV technical documentation
EU Machinery Regulation (Regulation (EU) 2023/1230) on compliance.theartofservice.com
Machinery Reg Art.8, 9 Essential health and safety requirements and sectoral coordination (Articles 8-9 + Annex III)

Article 8 imposes the central requirement: machinery and related products placed on the market or put into service shall comply with the essential health and safety requirements (EHSR) set out in Annex III. Annex III covers: 1.1 general principles of safety integration (eliminate / reduce / inform), 1.1.9 protection ag...

Evidence an inspector accepts: Annex III EHSR compliance file per product (risk assessment + design measures + residual-risk warnings); Annex III 1.1.9 cybersecurity-as-safety analysis (protection against unauthorised connections / software modifications); Annex III 1.2.6 AI / autonomous-behaviour safety analysis for AI-integrating machinery
Common gap: Product placed without Annex III EHSR compliance file
EU Machinery Regulation (Regulation (EU) 2023/1230) on compliance.theartofservice.com
Machinery Reg Art.21, 22 EU declaration of conformity and EU declaration of incorporation (Articles 21-22)

Article 21 requires the manufacturer to draw up the EU declaration of conformity per Annex V before placing on the market or putting into service. By drawing up the EU DoC the manufacturer assumes responsibility for compliance. The EU DoC is kept for 10 years. Article 22 sets the EU declaration of incorporation for par...

Evidence an inspector accepts: EU DoC per machine aligned with Annex V; EU DoI per partly completed machinery aligned with Annex XI; 10-year retention plan
Common gap: Machine placed without EU DoC
EU Machinery Regulation (Regulation (EU) 2023/1230) on compliance.theartofservice.com
Machinery Reg Art.23, 24 CE marking principles and affixing rules (Articles 23-24)

Article 23 applies the general principles of the CE marking per Regulation (EC) 765/2008 to machinery. Article 24 sets the affixing rules: CE marking visible, legible, indelible, affixed before placing on the market; for high-risk products subject to Annex I requiring notified-body assessment, the NB identification num...

Evidence an inspector accepts: CE marking artwork + placement evidence; NB identification number alongside CE marking for high-risk Annex I products; Partly completed machinery NOT marked with CE
Common gap: CE marking on partly completed machinery
EU Machinery Regulation (Regulation (EU) 2023/1230) on compliance.theartofservice.com
Machinery Reg Art.25 Conformity assessment procedures (Article 25)

Article 25 sets the conformity assessment routes. (1) Default (non-Annex-I): manufacturer self-assessment via Annex VIII (internal production control) + Annex IV technical documentation. (2) Annex I high-risk products: mandatory third-party involvement. The manufacturer chooses among Annex IX (EU type-examination + pro...

Evidence an inspector accepts: Route selection record per machine class; Notified-body engagement evidence for Annex I products; Annex VIII / IX / X / XI procedural records
Common gap: Annex I (Class B) product self-declared without notified-body involvement
EU Machinery Regulation (Regulation (EU) 2023/1230) on compliance.theartofservice.com

Do this for every product you sell

Paste the list and get this classification for every product at once, per market, with the documents held and missing, the after-sale duties and the findings. Five products free, no account.

Build my conformity sheet

Equipment for explosive atmospheres · Industrial control panel or drive